TECHNICAL SPECIFICATIONS
| RATED POWER | 1KVA to 15KVA | 5KVA to 40 KVA | 5KVA to 15KVA | 5KVA to 150KVA |
| PHASE | 1 Phase | 3 Phase 1 Phase | 1 Phase 3 Phase | 3 Phase 3 Phase |
| INPUT VOLTAGE | 170V-270V | 340V-460V, 3 Phase 4 WIRE / 5 WIRE | 340V-460V | 340V-460V, 3-Phase 4 WIRE / 5 WIRE |
| FREQUENCY | 45-55Hz | 45-55Hz | 45-55Hz | 45-55Hz |
| DC VOLTAGE | 120V-192V | 240V-360V | 180V-192V | 240V-360V |
| TECHNOLOGY | Microcontroller based High Frequency PWM using IGBT as Principal Switching Device / DSP based design | |||
INVERTER
OUTPUTVOLTAGE : 230V ± 1% 200/380/400/415 AC+ 1% 3PHASE, 4 WIRE / 5 WIRE
OUTPUT FREQUENCY: Crystal Controlled 50 Hz ± 0.01% or 60Hz ± as required
OUTPUT WAVE FORM: Pure Sinewave
OUTPUTISOLATION: Galvanic Isolation Transformer provided as standard design feature
HARMONIC: Less than 3% for Linear Load and less than 5% for Non- Linear Load
DISTORTION | THD |
POWER FACTOR: 08% to Unity
PEAK SURGE: 300% for 3000 ms
HANDLING CAPACITY
EFFICIENCY: Better than 92%
OVERLOAD CAPACITY: 125% for 5 minutes, 150% for 60 seconds
CREST FACTOR: 4:1
TRANSIENT RECOVERY: within 3 cycle
BYPASS: Manual Bypass / Static Bypass, transfer time < 2ms
BATTERY CHARGER
CHARGER TYPE: Constant Voltage Constant Current. Trickle / Float and Boost /IGBT Charger | optional |
CHARGING TIME: 8 to 10 hours
CHARGING CURRENT : @10% of the Rated Battery AH
OPERATING CONDITIONS
OPERATING TEMP. : 0°C to 50°C
RELATIVE HUMIDITY: 90% Non-Condensing
NOISE LEVEL : less than 55db at 1 meter
COOLING: forced Air Cooling by Fan
ENCLOSURE TYPE: IP 21 or IP 31
TRANSFER TIME: 0 millisecond
INDICATIONS
LCD DISPLAY: Input Voltage, Output Voltage, Input Frequency, Output Frequency, Output Current, Low Battery, Battery Current, Battery Voltage
AUDIBLE ALARM: Battery Low, Mains Low, Fault AC Over, Overload
PROTECTION: Output | Input Cut-Off, Overload, Short Circuit protection through Fuses and sensing as required Battery Over Voltage|Under Voltage Cut-Off • Reverse Polarity of Battery
COMMUNICATION & MANAGEMENT: Ethernet optional |
GALVANIC ISOLATION: Superior full time isolation in built into all DATAVISION UPS. Output is fully isolation try double conversion and isolation transformer, No need to have extra isolation as required for imported system.
COMPONENTS MAKE: All components used in DATAVISION UPS are of high quality and reputed make:
- Capacitors: Alcon/Rescon
- IGBT : Mitsubishi, Semikron, Toshiba
- Rectifiers: Semicron,IXYX
- Electrolytic Capacitor: Keltrons, Philips, CDIL.
ALSO AVAILABLE
- Hot Standby Model
- IGBT Charger for Better Efficiency Custom Built Online UPS like 60Hz Frequency & 110V Output 3 Phase |
IGBT ONLINE UPS SYSTEMS
SALIENT FEATURES
> Wide Input Window
> Latest Microprocessor based technology | DSP technology
> Unlimited Back up
> In built Galvanic Isolation Transformer for better performance
> Sixth Generation Low Exhaust IGBT
> 100% unbalanced Load acceptable
> User friendly Screen Display
> Ability to work with al critical loads and compatible
> Cold Start Function
> Onsite up-gradation of UPS by 25% of its present capacity
> Peak Surge Handling Capacity of 300% for 3000ms
> RS232 Communication Port optional |
Reviews
There are no reviews yet.